Control Dial; Details On The Device; Signal Tones; Overheating Protection Facility - CASO DESIGN Gastro 3500 Ecostyle Bedienungsanleitung

14.1 Control dial

14.2 Details on the device

This symbol is used to warn that the ceramic hob may still be hot. Although the
induction cooker itself does not generate any heat during the cooking process,
the temperature of the cooking utensil does heat the hob!
Adhere to the following safety instructions in order to avoid being burnt by the
hot appliance:
CAUTION
Risk of burning due to hot surface!
► Do not touch the surface of the ceramic hob while it is still hot.
► Do not place any objects on the hot ceramic hob.

14.3 Signal Tones

The appliance emits an acoustic signal after being switched on and in the event of a fault.
► The acoustic signal continues to sound until the fault has been rectified or the appliance
has been switched off. You will find more detailed information on fault indications in the
chapter entitled „Fault indications".

14.4 Overheating Protection Facility

The appliance is equipped with an overheating protection facility. If the temperature of the
appliance exceeds the critical limit then you can hear an acoustic signal. For safety
reasons the appliance shuts off further power supply. After the cooling-down phase the
appliance can be switched off and then back on again.
► The acoustic signal continues until the fault has been rectified or the appliance has
been switched off.
You will find more detailed information on fault indications in the chapter entitled „Fault
indications".
Caso Gastro 3500 Ecostyle
OFF = OFF/Standby
Levels from 1000 W to 3500 W (Max)
Please note
Please note
36