Operating & Changing The Vaping Modes; Regulating The Power Output And The Temperature - Aspire Archon Bedienungsanleitung

Operating & Changing the Vaping Modes
Regulating the Power Output and the
Temperature
Press "+" to increase wattage, voltage or temperature "-" button
to decrease. Press "+" or "-" button longer will change the
number faster.
Switch between °C and °F
If you increase the temperature to 315°C and press the "+"
button once again, the temperature reading will automatically
change to the lowest Fahrenheit (200°F). Equally, if the tempe-
rature is set at the lowest Fahrenheit (200°F) and you press the
"-" button once again, the temperature reading will automatically
change to the highest Celsius (315 °C).
Select the Vaping Mode
When the mod is on, press W button to switch mode between
VW (W), VV (V), BYPASS (B) and CFBP (C1, C2, C3). Press T
button to select TC modes Ni200, Ti, SS316L or TCR (M1, M2,
M3 manual modes).
Notes:
1. While the mod is in TC mode attaching a new atomizer
the mod will read "New Atomizer" followed by "YES+/
NO-" Select "YES+" and the mod will read the original coil
resistance. Select "NO-" and the mod will keep its previous
coil resistance settings.
2. The device will detect and lock coil resistance automatically
under TC mode. To ensure accuracy when first installing
a new atomizer make sure the coil is at room temperature
before attaching it to the mod.
43