Changing The Atomizer Head - Aspire Nautilus 2 Bedienungsanleitung

Using the Device
36

Changing the Atomizer Head

Screw the stainless steel sleeve from the Nautilus 2 clearomizer and
disconnect the drauned glass tank from the device. Remove the old
atomizer head and insert a new one. Please first drip a few drops of
e-liquid directly into the wick of the coil to make it fully saturated before
first use.
Connect the glass tank with the clearomizer and refill e-liquid. Screw
the stainless steel sleeve back to the clearomizers and sure that no
e-liquid can overflow and / or leak.
Please note the following: Prior to first use, drip a few drops
of your e-liquid on the atomizer head and let it sit before vaping.
Please take several puffs without activating the atomizer and leave
the atomizer head sit for 15 minutes in the e-liquid filled tank befo-
re use. Don't clean atomizer heads with water. Because atomizer
coils are wearing parts, they must be changed regularly.