Using the Device
Changing the Atomizer Head
1. Remove the clearomizer from the battery / box mod of your e-cigarette.
2. Screw the head base from the glass tank, while the mouthpiece
points to the ground.
3. Pull out the old atomizer head and insert a new one. Please first drip
a few drops of e-liquid directly into the wick of the coil to make it fully
saturated before first use.
4. Connect all parts again and make sure that no e-liquid can leak.
5. Screw the clearomizer back to the battery / box mod.
Please also note the operating instructions on page 36.
38