Changing The Atomizer Head - Aspire Cleito 120 Pro Bedienungsanleitung

Using the Device

Changing the Atomizer Head

1. Remove the clearomizer from the battery / box mod of your
e-cigarette.
2. Unscrew the mouthpiece from the device.
3. Pull the upper unit off the glass tank.
4. Remove the old atomizer head and insert a new one. Please
first drip a few drops of e-liquid directly into the wick of the coil
to make it fully saturated before first use.
5. Connect all parts again and make sure that no e-liquid can leak.
6. Finally, reconnect the clearomizer back to the battery / box
mod.
Please also note the
operating instructions
on page 38.
41