Aspire Archon Bedienungsanleitung Seite 46

44
Operating & Changing the Vaping Modes
TCR Settings
Press „T" and „+" simultaneously to change TCR settings. Press
"T" button to select coil material from Ni, Ti, SS316L, M1, M2,
M3. Press "W" button to select between "PWR" (Power) and
"TCR" (Temperature Control) under M1, M2, M3 mode. Press
"+" and "-" buttons to change PWR or TCR numbers (TCR
-3
numbers can be adjusted from 0.20‰ to 9.99‰. ‰=×10 .)
Customizable Firing Button Profiles (CFBP)
Intro: The CFBP feature allows for heat ramp-up (power curve)
to be fine-tuned. This customization can be made with just a
few clicks of the NX mod buttons. There is no need to connect
to computer to program settings making this function very easy
to use. Firing button profiles create extraordinary avor with no
limitations on tanks.
Press W button to select VW,VV,Bypass, C1, C2 and C3. C1,
C2, C3 are CFBPs. Under CFBP, users can customize power
curves to create their preferred taste. The graph above shows
the CFBP curve when the mod been idle.
When the firing button is held down, the screen will display the
power curve you have preset. Users can set the wattage for
each second if needed.