Charging & Upgrading The Device; Firmware Upgrade - Aspire Archon Bedienungsanleitung

Charging & Upgrading the Device
Charging
Charging the device via Micro-USB charging port, the maximum
current can reach up to 2.
Connect your Archon mod to the charger and the screen will
show a ashing battery icon. When the battery charge reaches
4.2V or is fully charged, the mod will stop charging and the
screen will remain off.
The mod supports passthrough charging. To lengthen the life of
the mod, we do not recommend vaping while charging.
Notes:
1. The battery can not be replaced while charging. Please
unplug the USB cable before changing your battery.
2. When the battery charge drops below 0.5V or battery
incorrectly installed the mod will stop charging.
3. To accomplish 2A charge current, the adaptor output should
be 5V/2A.
4. During charging, if the usb cable detects a voltage less than
4.3V, the screen on the mod will display „Check Charger".

Firmware Upgrade

Download the driver software from Aspire website:
http://www.aspirecig.com/upgrade/
Connect the device to your PC. The driver will detect your mod
automatically. Click "OpenFile" to choose the correct firmware
file. Click "Update" to upgrade your device. If it failed during the
update process please repeat step 3 to step 4.
41