Herunterladen Inhalt Inhalt Diese Seite drucken

Würth Master EWS 28-A Bedienungsanleitung Seite 15

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
EWS 28 A.book Seite 15 Mittwoch, 13. Februar 2008 3:24 15
Support panels or any oversized workpiece to min-
imize the risk of wheel pinching and kickback.
Large workpieces tend to sag under their own
weight. Supports must be placed under the work-
piece near the line of cut and near the edge of the
workpiece on both sides of the wheel.
Use extra caution when making a "pocket cut" into
existing walls or other blind areas. The protruding
wheel may cut gas or water pipes, electrical wiring
or objects that can cause kickback.
Safety warnings specific for sanding operations
When sanding, do not use excessively oversized
sanding disc paper. Follow the manufacturers' rec-
ommendations when selecting sanding paper.
Larger sanding paper extending beyond the sanding
pad presents a laceration hazard and may cause
snagging, tearing of the disc, or kickback.
Safety warnings specific for wire brushing operations
Be aware that wire bristles are thrown by the brush
even during ordinary operation. Do not overstress
the wires by applying excessive load to the brush.
The wire bristles can easily penetrate light clothing
and/or skin.
If the use of a guard is recommended for wire
brushing, do not allow any interference of the wire
wheel or brush with the guard. Wire wheel or brush
may expand in diameter due to work load and cen-
trifugal forces.
Additional safety instructions
Use suitable detectors to determine if utility lines
are hidden in the work area or call the local utility
company for assistance.
Contact with electric lines can lead to fire and electric
shock. Damaging a gas line can lead to explosion.
Penetrating a water line causes property damage or
may cause an electric shock.
When working stone, use dust extraction. The vac-
uum cleaner must be approved for the extraction of
Using
this
stone
dust.
dust-related hazards.
Use a cutting guide when cutting stone. Without
sideward guidance, the cutting disc can jam and
cause kickback.
Prevent unintentional switching on. Carrying power
tools with your finger on the On/Off switch can lead
to accidents.
For cutting applications, always use an enclosed
protection guard (accessory).
Before each use, check the machine and battery. If
damage is detected, do not use the machine. Have
repairs performed only by a qualified technician.
Never open the machine yourself.
Before any work on the power tool (e. g. mainte-
nance, changing the tool, etc.), remove the battery.
There is danger of injury from an accidentally start-
ing power tool.
Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
Never allow children to use the machine.
Wheels must be used only for recommended appli-
cations.
Battery and Battery Charger
The enclosed operating instructions for the battery
charger must be read carefully!
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acciden-
tally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
Allow a heated battery to cool before charging.
Do not open the battery, and protect it from impact.
Store in a dry and frost-free place.
When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
Use only original Würth parts and accessories.
equipment
reduces
Protect the battery from heat and fire: Dan-
ger of explosion! Do not place the battery on
radiators or expose to strong sun rays for a
longer time; temperatures over 50 °C cause
damage.
Do not dispose of the
battery in household
waste or discard into
fire or water.
15

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Master ews 28-aEws 28-a0700 237 serie

Inhaltsverzeichnis