Kärcher BR/BD 530 Ep Bedienungsanleitung Seite 21

Set advance speed (only BD 530 or
BD 530 XL)
Reducing the speed: Turn the button in
"–" direction.
Increasing the speed: Turn the button in
"+" direction.
Setting the water quantity
Set the water quantity at the regulation
knob according to the dirt level and the
type of flooring.
Note
Carry out initial cleaning attempts with low
quantity of water. Slowly increase the wa-
ter quantity till the desired cleaning result is
achieved.
Setting the Vacuum Bar
Oblique position
To improve the vacuuming result on tiled
floors the vacuum bar can be turned to an
oblique position of up to 5°.
Loosen cross-handles.
Turn the vacuum bar.
Tighten the cross-handles.
Inclination
If the vacuum result is unsatisfactory the in-
clination of the straight vacuum bar can be
modified.
Release the wing nuts.
Tilt the vacuum bar.
Tighten the wing nuts.
Lower the vacuum bar
Turn the lever downwards; the vacuum
bar is lowered.
Switch on the suction turbine using the
switch.
– 6
EN 21