Maintenance Schedule; Maintenance Works - Kärcher BR/BD 530 Ep Bedienungsanleitung

Maintenance schedule

After the work
Warning
Risk of damage. Do not wash down the ap-
pliance with water and do not use aggres-
sive detergents.
Drain off dirt water.
Rinse the dirt water reservoir with clear
water.
Clean the outside of the appliance with
a damp cloth which has been soaked in
mild detergent.
Check the fluff filter, clean if required
Clean the vacuum lips and the wiping
lips, check for wear and replace if re-
quired.
Check the brushes for wear, replace if
required.
Monthly
Check the condition of the seals be-
tween dirt water reservoir and cover, re-
place if required.
Yearly
Have the prescribed inspection carried
out by the customer service.

Maintenance Works

Turn or replace vacuum lips
Remove the vacuum bar.
Unscrew the star grips.
Remove the plastic parts.
Remove the vacuum lips.
Turn the vacuum lips or insert new ones.
Insert the plastic parts.
Screw in and tighten the star grips.
Replacing the brush rollers
Release the wing nuts.
Remove bearing lid.
Take out both the brush rollers, insert new
ones (follow the six-edge positions).
Place bearing lid.
Tighten the wing nuts.
Replacing the disk brushes
Turn the button for the setting of the ad-
vance speed in "– " direction.
Raise the disk brush.
Turn the disk brush by approx. 45° in
anti-clock-wise direction.
Remove the disk brush at the bottom.
Insert new disk brush in reverse se-
quence.
Set the advance speed.
Maintenance contract
To ensure a reliable operation of the appli-
ance maintenance contracts can be con-
cluded with the competent Kärcher sales
office.
– 8
EN 23