Frost Warning - Hama EWS-890 Bedienungsanleitung

6.5. Maximum and minimum temperature and humidity values
• The base station automatically stores the maximum and minimum indoor/outdoor temperature and humidity values.
• Repeatedly press the MEM– button (17) to switch between the current temperature and humidity, minimum temperature and humidity
(MIN) and maximum temperature and humidity (MAX).
• The maximum and minimum values are displayed for 5 seconds.
• Press and hold the MEM– button (17) to reset the stored maximum and minimum values.

6.6. Frost warning

• If the outdoor temperature (8) is between -2°C and ~ 3°C, the frost warning symbol
• The frost warning symbol
6.7. Backlight
Note – Backlight
• If you press the SNOOZE/LIGHT button (11), the display will light up for approx. 5 seconds.
6.8. Low battery charge
As soon as the battery symbol
low. Replace the batteries immediately.
Note – Replacing the batteries
• Note that the stations have to be resynchronised each time after you change the batteries in the measuring or base station.
• To do this, remove the batteries from the other station and then reinsert them, or change them as required.
6.9. Reset
• If displays/transmissions continually fail to appear or are incorrect, use a pointed object (paper clip, etc.) to press the RESET button (18)
on the base station and the RESET button (24) on the measuring station to carry out a restart.
• The base station returns to the factory settings and all stored information is lost.
6
Symbol (6)
disappears once the temperature rises above this range.
appears on the display of the base station, the capacity of the batteries in the measuring station is very
Weather
Sun
Slightly cloudy
Cloudy
Rain
appears on the LCD and flashes continuously.