Moon Phases; Alarm Setting; Temperature & Humidity Display - LEXIBOOK MeteoClock Fruity Bedienungsanleitung

SM940IM size : 120mm W x 120mm H
DATE/MONTH/YEAR SETTING
1. After clock 1 is set, press Mode [1] to accept the time settings. Upon pressing Mode, the month and date
will flash.
2. Press the Hour/+ [2] to set the month.
3. Press the Minute/- [3] to set the date.
4. Press Mode [1], the year will flash. Press the Hour/+ [2] to move the year upwards and Minute/- [3] to
move the year downwards. Press Mode [1] to confirm all your settings.
Clock 2 Settings (Dual Time)
1. Scroll to Clock 2 using Mode [1].
2. Press Hour/+ [2] ou Minute/- [3] key to change the hour (in hour increments/decrements relative to
Clock 1).

ALARM SETTING

Alarm 1 and Alarm 2 Setting
Scroll to Alarm1 mode (Alarm2 mode) using Mode [1].
1. Press Hour/+ [2] to set the hour.
2. Press Minute/- [3] to set the minutes.
3. Press Snooze [5] to toggle alarm on and off. When the alarm is set ON, the bell symbol
When Alarm Sounds
a. 1 or 2 will flash.
b. Press Snooze [5] to snooze the alarm for 5 minutes. After that the alarm will sound again.
c. Press ANY other key to turn the alarm sound off. If not manually interrupted, the alarm sound will
automatically stop after one minute.
will appear.
21

MOON PHASES

Throughout the 28 days of the lunar month, the aspect of the moon changes. Indeed, the moon, being
spherical, is always half lightened up by the sun. As the moon rotates around the Earth, the appearance of its
lightened side changes continuously. This phenomenon creates moon phases. The moon phase on your
MeteoClock is automatically updated according to the year/ month/day.
Moon Phase Display
1. New Moon
2. Young Crescent
3. First Quarter
4. Waxing Gibbous
5. Full Moon
6. Waning Gibbous
7. Last Quarter
8. Old Crescent
TEMPERATURE & HUMIDITY DISPLAY
Check Outside Temperature & Humidity
1. Press Channel [4] to toggle between the data of your various remote sensors: Outside 1 (channel 1),
Outside 2 (channel 2), Outside 3 (channel 3), and Outside 4 (channel 4).
Note: if you do not have any additional sensors, please disregard this function.
°C or °F Temperature Display
2. Toggle between °C and °F by pressing Snooze/- [5] in Clock 1 mode.
Min and Max Temperature & Humidity
3. Press Hour/+ [2] in Clock 1 mode to display minimum and maximum temperature and humidity records.
22