Hama Color Edge Bedienungsanleitung Seite 8

Atmospheric pressure (hPA/inHg)
Note
Like all measurement values, atmospheric pressure is subject to a certain measurement tolerance.
• Press and hold the Set button (20) until the time begins to flash.
• Press the Set button (20) repeatedly until hPA or inHG appears on the display.
• Press the UP button (19) or DOWN button (22) to change the unit to inHG or hPA.
• The weather station gives a current value trend for atmospheric pressure.
6.3 Weather trend display
Based on changes in the atmospheric pressure and the data saved, the base station is able to make
weather forecasts for the next 12 to 24 hours.
Note – Weather trend display
The weather forecast function is not available during the first few hours of operation because it requires
data that is collected during operation.
The weather trend and the current weather are displayed using four different symbols (1):
Symbol
6.4 Moon phases
The base station displays the current moon phase with the following symbols:
New Moon
Waxing Crescent
First quarter
Waxing Gibbous
Weather
Sunny
Slightly cloudy
Cloudy
Rainy
Full Moon
Waning Gibbous
Last quarter
Waning Crescent
7