Base Station - Hama Color Edge Bedienungsanleitung

2. Package Contents
• Color Edge weather station
(base station for indoors/measuring station for outdoors)
• 3 AAA batteries
• 2 AA batteries
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commercial use only.
• Do not operate the product outside the power limits given in the specifications.
• Do not use the product in moist environments and avoid splashes.
• Do not use the product in the immediate vicinity of heaters or other heat sources or in direct
sunlight.
• Do not use the product in areas where the use of electronic devices is not permitted.
• Do not place the product near interference fields, metal frames, computers, TVs, etc. Electronic
devices and window frames can negatively affect the product's functionality.
• Do not drop the product and do not expose it to any major shocks.
• Do not open the device or continue to operate it if it becomes damaged.
• Do not attempt to service or repair the product yourself. Leave any and all service work to qualified
experts.
• Keep the packaging material out of the reach of children due to the risk of suffocation.
• Dispose of packaging material immediately according to locally applicable regulations.
• Do not modify the product in any way. Doing so voids the warranty.
Warning – Batteries
• Immediately remove and dispose of dead batteries from the product.
• Only use batteries (or rechargeable batteries) that match the specified type.
• Do not mix old and new batteries or batteries of a different type or make.
• When inserting batteries, note the correct polarity (+ and - markings) and insert the batteries
accordingly. Failure to do so could result in the batteries leaking or exploding.
• Do not overcharge batteries.
• Keep batteries out of the reach of children.
• Do not short circuit the batteries/rechargeable batteries and keep them away from uncoated
metal objects.
• Outdoor temperatures below 0°C/32°F can reduce the battery performance of the sensor and
lead to inefficiency in wireless transmission.
• Declining battery capacity can result in reception and transmission difficulties, and it may
become difficult to read the display.
4. Getting Started
4.1 Insert batteries
Note
Before use, ensure you insert the batteries in the measuring station first and then in the base
station.
Measuring station
• Open the battery compartment (28) and remove the contact breaker.
• Then close the battery compartment cover.
• The status LED lights up.

Base station

• Open the battery compartment (24) and remove the contact breaker.
• Then close the battery compartment cover.
3