Manual Settings - Hama Color Edge Bedienungsanleitung

Manual settings

• Press and hold the SET button (20) for approximately 3 seconds to make the following settings one
after the other:
• Time zone (from -12 to +12 hours CET)
• Hour
• Minute
• Year
• Month
• Day
• Unit of atmospheric pressure (hPa or inHg)
• Press the UP button (19) or DOWN button (22) to select your setting. Press the SET button (20) to
confirm your entries.
Note – Time zone
• The DCF signal can be received over long distances, but always transmits the current Central
European Time in Germany. Make sure you account for the time difference in countries in other
time zones.
• If you are in Moscow, the time is 3 hours later than in Germany. This means that you should set
+3 for the time zone. The clock then sets the time automatically to 3 hours ahead after receiving
the DCF signal or according to the manually set time.
Alarm
• Press and hold the ALARM button (23) for approximately 3 seconds to set the time of the alarm
displayed. The hours display begins to flash.
• Press the UP button (19) or DOWN button (22) to select the hour for the alarm time and confirm
your selection by pressing the ALARM button (23).
• Repeat the process to set the minutes for the alarm time.
• Repeat the entire process to set the second alarm.
• Press the ALARM button (23) once to display the alarm time. Press the ALARM button (23) once
more to activate the alarm.
• Press the ALARM button (23) a third time to deactivate the alarm.
• If the alarm is triggered, the alarm symbol is displayed and an alarm will sound.
• Press UP (19), DOWN (22), SET (20) or ALARM to stop the alarm.
Note – Snooze function
• While the alarm signal is sounding, press the SNOOZE button (18) or LIGHT button (21) to
activate the snooze function. The icon begins to flash on the display. The alarm signal will stop
for approximately 10 minutes, after which it will sound again.
• Press UP (19), DOWN, (22), SET (20) or ALARM to stop the snooze function and the alarm.
Temperature (Celsius/Fahrenheit)
• Press the UP button (19) to switch between °C and °F for the temperature display.
• The weather station indicates a trend as to how the values for the indoor and outdoor temperature
are likely to develop over the next few hours.
6
Display Trend
Increasing
Constant
Decreasing