Safety Precautions - Chauvin Arnoux PAC 11 Bedienungsanleitung

Deutsch ...................................................................................................................... 16
Italiano ........................................................................................................................ 23
Español ...................................................................................................................... 30
Thank you for purchasing a AC/Dc current clamp.
For best results from your instrument:
„ read these operating instructions carefully,
„ comply with the precautions for use.
WARNING, risk of DANGER! The operator must refer to these instructions whenever this
danger symbol appears.
Application or withdrawal authorized on conductors containing dangerous voltages. Type A
current sensor as per IEC 61010-2-032.
Equipment protected by double insulation.
The CE marking indicates conformity with European directives, in particular LVD and EMC.
The rubbish bin with a line through it indicates that, in the European Union, the product must
undergo selective disposal in compliance with Directive WEEE 2002/96/EC.
„ Only use the PAC 11 clamp indoors.
„ Do not expose the clamp to running water.
„ Do not use the PAC 11 clamp on uninsulated conductors at a voltage of more than 600 V in relation
to the earth.
„ For measurements on DC current, check zero output. Adjust if necessary (see "Operating procedure").
„ During measurement, ensure that the conductor is in line with the markings on the jaws and that the
clamp closes correctly.
„ Your clamp is supplied with a set of adhesive labels. Choose the label for your language and stick it
to the back of the case.
Our guarantee is applicable for twelve months after the date on which the equipment is made
available (extract from our General Conditions of Sale, available on request).

SAFETY PRECAUTIONS

WARRANTY
9