Before First Use - Electrolux GA60SLVSCN Benutzerinformation

12 www.electrolux.com
The washing results are the same as with
the normal programme duration but the
drying results can be less satisfactory.
Select a programme.
If TimeSaver is applicable, the display
shows the conditions Fast and Normal
and the programme duration for each
condition:
• Fast: select this condition to
• Normal: select this condition to
Before you set TimeSaver with the
programme ECO you have to deactivate
the AutoOpen option.
7.4 AutoOpen
This option is automatically activated
when you select the programme ECO and
it is not possible to select this option with
other programmes.

8. BEFORE FIRST USE

The first time you activate the appliance it
is necessary to set the language and time.
Default language is English.
1. Set the language
• Press the OK key to confirm
• Select a new language and then
2. Set the time and then press the OK
key to confirm.
3. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
The option is not applicable
to all the available
programmes. When the
option is applicable to the
programme, you can choose
to activate or deactivate the
TimeSaver option.
activate TimeSaver and press the
OK key to confirm.
deactivate TimeSaver and press
the OK key to confirm.
English
press the OK key to confirm.
You can deactivate AutoOpen in the
option list. In this case, the energy
consumption increases.
• While the drying phase operates, a
device opens the appliance door and
keeps it ajar.
• At the end of the programme, the
device retracts but the appliance door
can remain ajar or retract without
closing.
CAUTION!
Do not try to close the
appliance door while the
device keeps the door ajar.
This can cause damage to
the appliance.
not, adjust the level of the water
softener.
4. Fill the salt container.
5. Fill the rinse aid dispenser.
6. Open the water tap.
7. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not load the
baskets.
When you start a programme, the
appliance can take up to 5 minutes to
recharge the resin in the water softener. It
seems that the appliance is not working.
The washing phase starts only after this
procedure is completed. The procedure
will be repeated periodically.