Video Settings; In-3 Tv Mode (Overscan); Hue Ntsc Tint (Ntsc Colour Space Correction) - Motec Systems MD3071A-V Bedienungs- Und Montageanleitung

8.3

Video Settings

8.3.1 IN-3 TV Mode (Overscan)

Any number of compatible video sources can be connected to the IN-3 video in-
put. Some video sources show flicker effects on the edges of the screen or other
undesirable images such as a time stamp.
Switching on "IN-3 TV mode" crops the edges of the image by approximately
4 %. The reduced image is then enlarged to display in fullscreen mode.
 Open Expert Settings.
 Press the "Decrease" button and select "Video Settings".
 Press the "On-screen menu" button and check the "IN-3 TV
Mode" box.

8.3.2 HUE NTSC TINT (NTSC colour space correction)

The display of NTSC video sources can be optimised using the HUE NTSC TINT
function.
 Open Expert Settings.
 Press the "Decrease" button and select the "HUE
NTSC TINT" line.
 Press the "On-screen menu" button to select "HUE
NTSC TINT".
 Use the arrow buttons to adjust the value and
optimise the image (default 1).
 Press the "On-screen menu" button to exit and save
your settings.
EN
81