Setting The Colour - Motec Systems MD3071A-V Bedienungs- Und Montageanleitung

5.7

Setting the colour

The setting adapts the monitor to the video signal connected (camera). The aim
is to make the colours displayed look as natural as possible. It is recommended
that this setting is adjusted in daylight in "Day" mode.
 Press the "On-screen menu" button.
The on-screen menu is displayed.
 Press the "Decrease" button and select the "Colour"
line.
 Press the "On-screen menu" button to select "Colour".
 Use the arrow buttons to adjust the value and
optimise the image.
 Press the "On-screen menu" button to exit and save
your settings.
 Press the "Decrease" button and select the "Exit" line.
 Press the "On-screen menu" button.
This exits the on-screen menu. If no buttons are
pressed, then the menu automatically exits after about
10 seconds.
EN
71