Specifications - Mitsubishi Electric MAC-397IF Installationshandbuch

I When Mounting Directly to a Wall
Mount the interface unit 1 case to the wall using the mounting
screws 3.
Interface case
mounting screws D
* When mounting the interface unit 1 using a cushioning
material 4, be sure to mount it in a location where it will not
fall.
Interface unit 1
Cushioning material 4

8. Specifications

Input voltage
Power consumption
Input current
Mounting
screws 3
12 V
0.6 W
0.05 A
When mounting the interface unit 1 inside a ceiling
or wall, install an access door to facilitate mainte-
nance.
When the interface unit 1 is mounted
above an indoor RAC unit, it should be
positioned 40 mm or more away from the
unit to ensure that ceiling grills can be
removed.
40 mm or more
Attach the interface unit 1 connecting cable here.
Store extra connecting cable in the ductwork space
behind the indoor RAC unit.
* If there is any slack in the connecting cable, use a
fastener A to keep it in place.
13