Automatic Code Search For All Brands - Ebode TAKE 6 IR Bedienungsanleitung

BRAND
Philips / Radiola
Akai / Daewoo /
JVC / Panasonic /
Sharp / Sony /
Toshiba
Brandt / Thomson
1. Turn on the device you want to control.
2. Press and hold S (8) until the LED indicator (2) lights
steadily. Release S button.
3. Press the mode button (4) that matches the equipment
you wish to control. The LED (2) blinks once.
4. Enter the code corresponding to your brand, point the
TAKE 6 Remote in the direction of your equipment, press
CHAN+ (6) once only. Continue to point the TAKE 6
Remote at your equipment until the equipment changes
Channel (the remote control sends an IR signal every
second. Please wait until your equipment reacts). When
your equipment does react, press on the key -/-- (13) to
confirm. If you accidentally miss the code, you can stop
the autosearch by pressing CHAN- (6) and by repeatedly
pressing this key return to the right code. Press -/-- (13) to
confirm.

4.3 Automatic code search for all brands

When searching an unknown code, you can step
through the library automatically (AutoSearch). When
your equipment responds, you can stop the searching
process and store the code you found.
Note: as you can dedicate any appliance (TV, DVD,
STB...) to DVR, DVD, CD, STB, AUDIO or AUX key, you need
first to enter any 4-digit code for the kind of appliance
you wish to control (found in the code book), i.e.: If you
want to program a STB under the DVR key, enter ANY STB
code found in the code book and then follow the steps
below:
1. Turn on the device you want to control.
2. Press and hold S (8) until the LED indicator (2) lights
steadily. Release S button.
3. Press the mode button (4) that matches the equipment
you wish to control. The LED (2) blinks once.
4. Press CHAN+ (6) once. After a few seconds the remote
starts stepping through the code library (fast search, 1
code per second). When the device responds, you can
press CHAN+ (6) to switch to slow search (1 code per 3
seconds). You can step back by pressing CHAN- (6) (you
can step forward by pressing CHAN+ (6) in case you
went too far back). As soon as the device responds
again, press the -/-- key (13) to store the code you found.
Remark: if some functions of your equipment don't work,
you need to try another code for your brand. The search
function starts after the last confirmed code. For
example, if it was 030, the search function starts at 031,
and it will keep on trying until the last possible code.
23-5-2012
CODE
Telefunken /
1
Saba / Normende
2
3
8
BRAND
Grundig /
Blaupunkt
Nokia / ITT
ebode TAKE6 IR
CODE
4
5
6