Ebode TAKE 6 IR Bedienungsanleitung Seite 11

1. Press and hold S (8) until the LED indicator (2) lights
steadily. Release S.
2. Press the mode key (4) for the equipment you want to
identify (DVR, DVD, CD, STB, AUDIO or AUX). The LED
blinks once.
3. Press again S. The LED blinks once.
4. To identify the first digit press each number button from
0 - 9 (14) until the LED blinks. The number you pressed is
the first digit of the code.
5. Press each number key from 0 - 9 as above to find the
second digit.
6. Press each number key from 0 - 9 as above to find the
third digit.
7. Press each number key from 0 - 9 as above to find the
fourth digit. When the fourth digit has been found the LED
will go off.
4.7 Volume Control Punch Through
The TAKE 6 remote control allows you to select which
Mode controls your volume/mute buttons. The volume
buttons VOL+ (5), VOL- (5) and Mute (3) can be set for
individual control by EACH device Mode or can be set
for ALL device Modes to punch-through volume control
to one specific single device Mode. The remote is initially
set (Factory Default) for control by each specific device
Mode.
Adjustment of ALL volume controls to one mode.
You can allocate volume control to one of the modes of
the remote control providing that volume control exists
on the corresponding device (e.g. control of TV sound in
DVR, DVD, etc... mode).
- Hold down the S (8) key until the LED remains lit.
- Release the S (8) key.
- Press and hold the MUTE (3) key until the LED flashes
once, then release the MUTE key.
- Press the required mode key, e.g. TV, corresponding to
the device that will control the VOL and MUTE buttons for
ALL the device Modes.
- Press and release the MUTE (3) key and the LED turns off.
Adjustment of the volume controls for EACH mode.
You can allocate volume control to be individual for
each mode selected, providing that volume control
exists on the corresponding device (e.g. control of the
television set sound in TV mode, the control of the sound
of the STB receiver in STB mode, ...).
- Hold down the S (8) key until the LED remains lit.
- Release the S (8) key.
- Press and hold the MUTE (3) key until the LED flashes
once, then release the MUTE key.
- Press the required mode key, e.g. DVD, corresponding
to the device that will control its own VOL and MUTE keys.
- Press and release the VOL - (5) key once.
- Press and release the MUTE (3) key once and the LED
turns off.
4.8 ebode / X10 Home Automation Control via IR7243RF
The TAKE 6 control allows you to command all electric
appliances you have in your house.
Here are some examples that you can do with your 6 in 1
remote using X10:
-Switch on/off , dim lights while you watch TV.
23-5-2012 11 ebode TAKE6 IR