Insert The Batteries; Function Of The Remote's Buttons - Ebode TAKE 6 IR Bedienungsanleitung

a. Manual entry of one of the codes displayed under the
related brand and type of equipment in the attached
code book (see 4.1)
b. Automatic code search for some well-known brands
(4.2)
c. Automatic code search for all brands (4.3)
d. Manual search through all codes (4.4)
2. Insert the batteries (always use NEW AAA batteries)
1. Open the cover on the back of the TAKE 6 Remote.
2. Insert 2 AAA batteries, verify that they are placed
correctly with the + on the battery in the same position as
marked inside the battery compartment.
3. Close the battery compartment carefully.

3. Function of the remote's buttons

[1] POWER (On/Off)
Allows you to switch off the last selected appliance.
Some appliances can also be switched on with this
button.
[2] LED indicator
The indicator light flashes when the remote is operating
or lights continuously while you are programming the
remote.
[3] MUTE
Allows you to turn on/off the sound. You can control the
"Mute" function of your TV even when you are in DVR,
DVD or STB mode. No need to select the TV mode.
[4] TV, DVR, DVD, STB, AUX, AUDIO
These keys allow you to select the appliance you wish to
control.
[5] VOLUME +/-
Allows you to control the volume. You can control the
volume of your TV even when you are in DVR, DVD or STB
mode. No need to select the TV mode.
[6] CHAN +/- or PROG +/-
Select the next or the previous channel of your TV or STB.
In DVD mode: next or previous chapter.
[7] OK
Confirms menu selection.
[8] Set Up (S)
Allows you to program your remote before the first use. It
also allows you to access to secondary functions of
certain A/V appliances (Shift). Press the S key followed by
the function key you desire.
[9] Navigation Keys These buttons allow you to navigate
into the menu of the selected device (if the device you
selected has such a menu)
[10] Guide
23-5-2012 5 ebode TAKE6 IR