Space Requirements; Connecting The Unit; Dispensing; First Operation - Loctite 97007 Bedienungsanleitung

4 Installation
4.2

Space Requirements

4.3

Connecting the Unit

• Use only the cable and hose sets supplied.
• Connect power cord to power supply socket 6.
• Connect air pressure supply to pneumatic connection 8.
5

Dispensing

5.1

First Operation

• Check that the dispensing valve is connected correctly according to the operating manual.
• Switch the power switch 5 to position I (ON).
When you switch on the controller 97009 an empty signal with a peeping tone is indicated.
This will happen because there is no product bottle in the reservoir.
~350 mm
~13.8"
~230 mm
~9.1"
15