Declaration Of Ec Conformity - Loctite 97007 Bedienungsanleitung

9 Annex
9.3

Declaration of EC Conformity

The Manufacturer
declares that the unit designated in the following is, as a result of its design and construction, in accordance with the
European regulations, harmonized standards and national standards listed below.
Designation of the unit
Unit number
Applicable EC Directives
Applicable harmonized standards
Manufacturer's signature
For changes to the unit that were not approved by Loctite, this declaration loses its validity.
The Manufacturer
declares that the unit designated in the following is, as a result of its design and construction, in accordance with the
European regulations, harmonized standards and national standards listed below.
Designation of the unit
Unit number
Applicable EC Directive
Applicable harmonized standards
Manufacturer's signature
For changes to the unit that were not approved by Loctite, this declaration loses its validity.
28
Declaration of Conformity
In accordance with the EC-Machine Directive 98/37/EEC
Henkel Loctite Deutschland GmbH
Arabellastrasse 17
D-81925 München
Semi-automatic Dispense System
97007/97008/97009/97010
EC-Machine Directive 98/37/EC
DIN EN 292-1, 1991.11; DIN EN 292-2, 1995.06
07/10/2001
Declaration of Conformity
In accordance with the EC Directive for
Electro-Magnetic Compatibility 89/336/EEC, Appendix I
Henkel Loctite Deutschland GmbH
Arabellastrasse 17
D-81925 München
Semi-automatic Dispense System
97007/97008/97009/97010
only in connection with footswitch 97201
EC Directive for Electro-Magnetic Compatibility 89/336/EC in the
version 93/68/EC
EN 50011/3.1991; EN 50082-2/3.1995
07/10/2001
General Manager (F. Löhr)
General Manager (F. Löhr)