Electrolux WASL 3T201 Benutzerinformation Seite 8

8 www.electrolux.com
D
E
F
G
H
I
Graphic bars
If you make a wrong selection the message Err indicates that the selec‐
tion is not possible.
The steam symbol comes on when you set a Steam programme
(if available in your appliance).
The detergent overdosing symbol comes on at the end of the cy‐
cle when the appliance detects too much detergent.
You cannot open the appliance lid when the symbol is on. You
can open the lid only when the symbol goes off.
If the programme is completed but the symbol stays on:
• The «Rinse hold» function is on.
• There is water in the drum.
The delay start symbol comes on when you set the delay start
function.
Programme time
When the programme starts, the programme time decreases
with steps of 1 minute.
Delay start
When you press the delay start button, the display shows the de‐
lay start time
Alarm codes
If the appliance has a malfunction, the display shows alarm co‐
des. Refer to «Troubleshooting».
The display shows this message for some seconds when:
• you cannot set a function with the washing programme
• you try to change the washing programme while it operates.
When the programme is completed.
The child safety lock symbol comes on when this device is acti‐
vated.
The empty indicator bar appears only if the related function is
available for the set programme.
The indicator bar fills accordingly to the set functions.