Mid - Conformity Declaration; Safety Instructions; Electro-Magnetic Interference; Care Instructions - Zenner Zelsius C5 - CMF Montage- Und Bedienungsanleitung

Deutsch English

MID - Conformity declaration

zelsius C5-CMF is produced and
®
tested in compliance with the new
European Measuring Instruments
Directive (MID). According to this
directive, devices are no longer car-
rying an initial verification stamp, but
rather the year of the device's decla-
ration of conformity (recognizable on
the front of the device, for example:
M16). The MID controls the use of
heat meters up to the moment they
are placed on the market resp. their
first putting into use. After this, the
national regulations for devices sub-
ject to compulsory verification apply
within the EU. The duration of initial
verification validity in Germany re-
mains 5 years for heat meters. After
this period has expired the measu-
ring device may no longer be used
for billing in commercial use. The
regulations resp. validity period may
vary in other countries of the EU.
ZENNER International GmbH &
Co. KG declares that this product
with the number of the EC type-ex-
amination certificate DE-12-MI004-
PTB010 complies with the require-
ments of the directives 2014/32/EU
(Measuring instruments directive)
and 89/336/EEC (electro-magnetic
compatibility).
If you have questions, please direct
them to
support@zenner.com
The declaration of conformity and
the latest information about this pro-
22
Français
duct can be accessed or downloa-
ded from

Safety instructions

Electro-magnetic interference

zelsius
and international requirements for
interference resistance. To avoid
malfunctions due to other interferen-
ces, do not install fluorescent lamps,
switch cabinets or electric devices
such as motors or pumps in the im-
mediate vicinity of the meter. Cables
leaving the meter should not be laid
parallel to live cables (230V) (mini-
mum distance 0.2m).

Care instructions

Clean plastic surfaces with a damp
cloth only. Do not use any scouring
or aggressive cleaning agents! The
device is maintenance-free during
the service life. Repairs can only be
made by the manufacturer.

Installation instructions

Safety instructions for installa-
tion
Read these instructions carefully
right up to the end before starting to
mount the device! The installation
has to be done by qualified profes-
sional personnel. The current laws
and regulations have to be obser-
ved as well as the generally accep-
ted codes of practice, especially
EN1434 part 1+6, (in Germany also
AGFW directive FW202, FW510 and
FW218). At on devices with M-Bus
www.zenner.com
C5-CMF fulfils the national
®