Tomahawk CYCLONE Handbuch Seite 25

21
Prepare two cable harnesses with a lenght of
50-60cm.
23
Sand the Multilock sleeve and glue it flush to
the fuselage.
ASSEMBLY THE FUSELAGE
Route the cable harness through the fusela-
ge and glue it flush with the wing cheeks of
the fuselage. Please sand the connector be-
fore you start gluing.
Install the elevator to the fuselage. Use the
aluminium washers and make sure that the
elevator is perpendicular to the rudder.
ENGLISH
22
24
25