Specifications - Tomahawk CYCLONE Handbuch

Congratulation that you took the choice to purchase this Tomahawk RC model airplane, a very good
choice from our point of view.
We at Tomahawk Aviation put a lot of attention to the overall quality of the airplane in terms of de-
sign, performance and manufacturing quality. We used all of our experience designing and building
high quality aircraft in order to present you an exceptional product. We chose high grade material and
looked after high end accessories in order to ensure top level outcome in terms of function, perfor-
mance and durability of the product. We are open and offer all necessary support in case you should
find any problem with your airplane.
As you are well aware this is a technical product. Due to its nature it is required if not mandatory to
read the instruction manual completely. Please follow the steps to complete your model as described.
It will ensure that your model will turn out in the best possible way. Please also take notice and good
care about the warning messages at the end of the instruction manual. Knowing about them ensures
that you can operate the model in the safest possible manner keeping risk away from you and other
persons. Also ensure that you comply with the latest legislation in terms of flight safety.
We at Tomahawk Aviation wish you all the best for building and especially operating your RC airplane.
In case you have any questions please contact us. We are driven to offer the best possible support at
any time.
Span
Length
Flying weight
Wing area
Airfoil
ARF-Version
Motor ROXXY BL Outrunner D50-65-290kV
ESC ROXXY BL Control 9100 - 6
BEC JETI Max BEC
Servos 6x HITEC HS-645MG
Servo cables app. 7m Servo Cables + Plugs
Multilock 4x Mulitlock System
MPX-Plugs 2 pairs MPX Plugs
Battery pack 6S LiPo 5000-6000mAh
Folding prop 20x8"
Spinner 50mm
TX min. 7 Channels
RX min. 7 Channels
Glues 5min epoxy resin
60min epoxy resin (UHU Endfest 300)
Superglue thin
Thread locker
INTRODUCTION

SPECIFICATIONS

5500 mm
2250 mm
8600 g
165,5 dm²
HQ/W-2,5/12 + HQ/W-2,5/11 + HQ/W-3/10,5
NEEDED ACCESSORIES
PNP-Version
Himax C5030 (310KV) built-in
ROXXY BL Control 9100 - 6
JETI Max BEC
6x Tomahawk T-695 MG built-in
built-in
built-in
built-in
6S LiPo 5000-6000mAh
CFK 20x8" included
50mm Aluminum included
min. 7 Channels
min. 7 Channels
5min epoxy resin
60min epoxy resin (UHU Endfest 300)
Superglue thin
Thread locker
ENGLISH
19