Tomahawk CYCLONE Handbuch Seite 22

ENGLISH
Remove any arm that may interfere with the
operation of the servo. Enlarge the second
hole to 1,6mm.
Enlarge the hole at the exit in the direction
to the hinge, that the linkage will not be blo-
cked when the flaps are full driven.
22
ASSEMBLY THE FLAPS
10
12
11
The flaps will be actuated through the top of
the wing. Use a round file to prepare a chan-
nel for the linkage.
13
Drill a hole in a 45° angle for the rudder horn.
You than the aileron.