Specifications - AKG C4000 Bedienungsanleitung

Specifications

7 Specifications
Type:
Polar patterns:
Sensitivity at 1000 Hz:
Frequency range:
Electrical impedance:
Recommended load impedance:
Bass cut filter slope:
Preattenuation pad:
Equivalent noise level to IEC 60268-4:
Equivalent noise level to IEC 60268-4 (A-weighted):
Signal/noise ratio re 1 Pa (A-weighted):
Max. SPL for 0.5% THD (0/-10 dB):
Dynamic range:
Environment:
Power requirement:
Current consumption:
Connector pinout:
Size:
Net weight:
*) Values for 48 V phantom power; reduce by 6 dB for 24 V and 18 dB for 12 V phantom power.
This product conforms to the standards listed in the related Declaration of Conformity. To order a free copy of
the Declaration of Conformity for this product, visit http://www.akg.com or contact sales@akg.com.
16
1-inch dual diaphragm pressure gradient microphone
omnidirectional, cardioid, hypercardioid
25 mV/Pa (-32 dBV ±2 dB)
20 to 20,000 Hz (refer to frequency response curves)
 200 Ohm
 1.000 Ohm
12 dB/octave below 100 Hz
-10 dB, switchable
22 dB
8 dB-A
86 dB*)
350/1000 Pa Z 145/155 dB SPL*)
137 dB (A-weighted)*)
- temperature: -10°C to +60°C - (14°F to 140°F)
- relative humidity: 90% (+20°C/68°F), 85% (+60°C/140°F)
9 to 52 V phantom power to IEC 61938
 2 mA
3-pin male XLR to IEC standard
max. dia.: 58 mm (2.3 in.), length: 183 mm (7.2 in.)
450 g (1 lb.)
C4000