Specifications - Makita HR3210C Bedienungsanleitung

ENGLISH
1-1. Switch trigger
2-1. Lamp
3-1. Adjusting dial
4-1. Quick change chuck for SDS-plus
4-2. Change cover
4-3. Chuck cover
5-1. Spindle
5-2. Quick change drill chuck
5-3. Change cover
6-1. Lock button
6-2. Pointer
6-3. Change lever
7-1. Lock button
7-2. Change lever
7-3. Pointer
8-1. Pointer

SPECIFICATIONS

Concrete
Capacities
No load speed (min
Blows per minute
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for hammer drilling in brick, concrete
and stone as well as for chiselling work.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For Model HR3200C
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-6:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Explanation of general view
8-2. Change lever
8-3. Lock button
9-1. Power-ON indicator lamp (green)
9-2. Service indicator lamp (red)
10-1. Side grip
11-1. Bit shank
11-2. Bit grease
12-1. Bit
12-2. Chuck cover
13-1. Bit
13-2. Chuck cover
14-1. Change lever
14-2. Lock button
14-3. Pointer
15-1. Depth gauge
15-2. Clamp screw
Model
Tungsten-carbide tipped bit
Core bit
Steel
Wood
-1
)
Overall length
Net weight
Safety class
) : 89 dB(A)
pA
) : 100 dB(A)
WA
HR3200C
4.4 kg
ENE044-1
Vibration
The vibration
ENF002-1
determined according to EN60745-2-6:
Work mode : chiseling function
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : hammer drilling into concrete, 16 mm
diameter and 100 mm depth
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : drilling into metal
Vibration emission (a
ENG102-1
For Model HR3210C
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-6:
4
16-1. Dust cup
18-1. Blow-out bulb
20-1. Chuck adapter
20-2. Keyless drill chuck
21-1. Spindle
21-2. Quick change drill chuck
21-3. Change cover
22-1. Sleeve
22-2. Ring
23-1. Screws
24-1. Connector
25-1. Crank cap cover
25-2. Screws
26-1. Screws
29-1. Connector
HR3210C
32 mm
90 mm
13 mm
32 mm
315 - 630
1,650 - 3,300
398 mm
4.8 kg
/II
Wear ear protection
total value (tri-axial
) : 12.5 m/s
h,CHeq
2
) : 18 m/s
h,HD
2
) : 2.5 m/s
h,D
HR3210FCT
424 mm
5.0 kg
ENG215-1
vector sum)
2
ENG303-1
2
ENG302-1
2
or less
ENG102-1