Operation; Before Initial Operation - Pkm Wolkenstein GK212.4RT FR Bedienungsanleitung

Spacers
Depending on model, the appliance is
supplied with two plastic spacers. After
installation of these
appliance cannot be pushed against the
wall to maintain proper ventilation.
Insert the spacers into the relevant
openings on the back of the appliance,
then turn by 45 0 to the right or left

4. Operation

4.1 Before initial operation

1. Clean the appliance thoroughly. Be very careful especially inside the appliance.
2. After having installed the appliance wait 4-6 hours before you connect it
to the mains.
3. Set the thermostat to position 3 or 4.
4. Afterwards operate the appliance after 24 hours for the first time.
5. The temperature of the freezer should reach -18
the exact temperature of the cooling and freezer compartments using a suitable
thermometer .
5
Not included in delivery
5
spacers, the
.
0 C or colder. You can check
26