Maintenance - Chicco multiway 2 Gebrauchsanleitung

n-
up and down steps or pavements.
g
• A lways apply the brakes whenever
the stroller is stationary.
xi-
• T o avoid all risks of strangulation,
never give children objects with
le
cords or strings attached, or leave
he
them within their reach.
he
• I f the stroller is left exposed to di-
rect sun light for a long time, allow
d
it to cool down before placing your
child inside. Prolonged exposure
e-
to direct sun light may cause the
ot
colour of the materials and fabric
n-
to fade.
• D o not allow children to play unsu-
he
pervised near the stroller, and make
ts
sure they do not climb onto it.
g
• T he full-cover rain hood cannot
be be used on a stroller which has no
ut canopy or sun-hood as it could suf-
focate the child.
ts • P revent the stroller from coming
into contact with salt water. It may
cause the formation of rust.
m-
• D o not use the stroller on the
beach.
by
• W hen it is not being used, the
stroller should be kept out of chil-
he
dren's reach.
ly
CLEANING AND MAINTENANCE
se
The cleaning and maintenance of this product must be carried out
on a regular basis by the user. The cleaning and maintenance of the
stroller must only be carried out by an adult.
ke
CLEANING
The cover is not removable. Clean the fabric parts with a damp
sponge and neutral detergent. Please refer to the care label. Periodi-
cally wipe clean plastic parts with a soft damp cloth. Always dry the
p-
metal parts to prevent the formation of rust if the stroller has come
into contact with water.
n
Wash by hand in cold water
es
Do not bleach.
ly
Do not tumble dry
Do not iron.
g
Do not dry clean.

MAINTENANCE

Lubricate the moving parts only if necessary, with a light applica-
tion of a silicone based lubricant. Regularly check the condition of
the wheels and, keep them clean of dust and sand. To avoid friction
that may prevent the correct operation of the stroller, ensure that all
the movable plastic parts placed along the metal frame are clean of
dust, dirt or sand.
Keep the stroller in a dry place.
LIST OF COMPONENTS
Check that you have all the parts required for this model before as-
sembling the product. If any parts are missing, please contact the
Chicco Customer Care Service. No tools are needed to assemble the
product. The following parts are needed to assemble the product:
1 stroller
2 front wheels
2 rear wheels
1 canopy
1 rain cover
1 carry-all basket
1 bumper bar
1 sleep sack/ leg cover
GENERAL INSTRUCTIONS
HOW TO ASSEMBLE THE WHEELS
1. F it the front wheel unit to the stroller and lock it into position
(diag. 1). Repeat this operation for the other wheel unit. Subse-
quently insert the rear wheels as indicated in diagram 1A, pushing
down until they are locked into place.
WARNING: Before use, ensure that the wheel units are safely locked
into position. It is possible to remove the front and rear wheels by
pressing the relative buttons (diag. 1B)
HOW TO OPEN THE STROLLER
WARNING: To avoid injury ensure that your child is kept away when
unfolding and folding this product. When adjusting the stroller, make
sure that no moving parts come into contact with your child.
2. H old the stroller by the handles in a vertical position, with the
wheels facing forward (diag. 2).
3. R elease the closing device (diag. 3 a) and push the front part of
the stroller forward (diag. 3 b).
4. P ush the rear primary locking mechanism downward with your
foot (diag. 4).
WARNING: Before use, ensure that the stroller is locked in the open
position, by checking that the locking mechanism, at the rear of the
stroller, is effectively locked.
WARNING: Check regularly that the belt under the seat is tensioned
(diag. 4a).
HOW TO USE THE SAFETY HARNESS
This stroller has a 5-point safety harness featuring two shoulder
straps, two adjustment holes, a waist strap and a crotch strap with
buckle. WARNING: When using the safety harness with children from
birth up to approximately 6 months of age, it is necessary to first fit
the shoulder straps through the two adjustment holes.
5. A fter sitting your child in the stroller, fasten the safety harness
(diag. 5), first inserting the two prongs (A) into the hole located
on the shoulder straps (B) and then into the buckle (C); Adjust
the height of the shoulder straps, ensuring that they adhere to
the child's shoulders correctly. Always ensure that the harness is
fastened correctly. To unfasten the waist strap, press and pull the
side prongs.
WARNING: Children should be harnessed in at all times. To ensure
your child's safety, it is necessary to always use the safety harness.
HOW TO ADJUST THE BACKREST
The backrest can be adjusted to 5 positions.
6. T o adjust the inclination of the backrest to the desired position,
press the button located on the backrest; Release the button to
lock the backrest in the nearest position. To raise the backrest sim-
ply push it in an upward direction. (diag. 6a, 6b).
19