Maintenance And Cleaning - FALMEC PRISMA Bedienungssanleitung

Key pressure management:
Prolonged pressure = finger pressed on key for at least 3 seconds, the function activates
during pressure.
Non-prolonged pressure = finger pressed on key for less than 3 seconds, the function
activates upon its release.
H
FILTERS
1. METAL FILTERS
Open the front glass panel to open the anti-grease metal filter and
adjust the handle (see fig. H1).
2. ACTIVATED CARBON FILTERS
Remove the metal filters by following the instructions in paragraph H1.
The two filters attached to the right and left side of the conveyor can now be easily ac-
cessed.
See figure H2 for assembly/replacement.
To order new carbon filters contact your distributor/dealer.
ONLY FOR ITALY: Download the form to order the filter from the website:
www.falmec.com (via the dropdown assistance menu).
I
LIGHTING
LED SPOTLIGHT
In this case the hood is equipped with high efficiency, low power LED spotlights with extremely
high durability under normal use conditions.
L

MAINTENANCE AND CLEANING

Constant maintenance ensures the correct operation and efficiency of the appliance over
time. Special attention should be paid to the metal grease-trapping filters and the charcoal
filters. Frequent cleaning of the filters and their supports will ensure that fats and grease do
not accumulate on the range hood, with the consequent risk of fire.
1. METAL ANTI-GREASE FILTERS AND GREASE DRIP TRAY
Their function is to trap suspended grease particles, accordingly, it is advisable to wash
them once a month in hot water and detergent, without bending them. Leave to dry
completely before re-assembling them.
18
INSTRUCTIONS FOR REMOVAL AND REPLACEMENT