Reversing The Door Opening - Edy EDTK6002 Gebrauchsanleitung

Note: gurgling and hissing noises due to expansion in the
refrigerant circuit are normal.
9 | REVERSING tHE DooR oPENING
it is possible to change the door opening from either the
left or the right side. the appliance is delivered with the
door opening from the left side. to change the opening
direction, please follow these instructions.
Note: Before reversing the door swing, unplug the
appliance from the mains.
• remove the screws at the back, holding the top panel
to the appliance.
• lift the top panel at the backside and remove it.
• remove the three screws holding the top hinge (right
side) to the frame. remove the top hinge.
• lift the door from the bottom hinge pin and place it on a
non-scratching surface.
• to easily remove the bottom hinge tilt the appliance at
max. 45°.
• remove the front leg on the left by unscrewing it.
• remove the two screws holding the bottom hinge.
remove the bottom hinge.
• Before replacing the bottom hinge, remove the hinge pin
and reverse the direction of the hinge. reassemble the
bottom hinge on the left hand side using the two screws.
15