Checking The Glider; The Final Word - Airdesign eazy superlight Betriebshandbuch

9.

Checking the glider

Even with the best possible care each glider is subjected to a certain ageing which can affect
the flying characteristics, performance and safety.
A thorough inspection of all components, including checking suspension line strength, line
geometry, riser geometry and permeability of the canopy material is mandatory.
2-Years Inspection:
After 24 months or 150 flight hours (whichever occurs first) the glider must be inspected. This
check will be made by the manufacturer, importer, distributor or other authorised persons.
The checking must be proven by a stamp on the certification sticker on the glider as well in the
service book.
In the event that a glider is NOT checked according to this schedule, the airworthiness
warranty of the glider is invalidated.
More information about servicing and inspections can be found in the document "Inspection
Information" available on the AIRDESIGN website www.ad-gliders.com
Ground-handling times must be multiplied by factor of 2 due to the greater contact with
abrasive surfaces.
Respecting nature and environment:
Finally, we would ask each pilot to take care of nature and our environment. Respect nature
and the environment at all times but most particularly at take-off and landing places.
Respect others and paraglide in harmony with nature.
Do not leave marked tracks and do not leave rubbish behind.
Do not make unnecessary noise and respect sensitive biological areas.
The materials used on a paraglider should be recycled.
Please send old AIRDESIGN gliders back to us AIRDESIGN offices. We will undertake to recycle
the glider.
10.

The Final Word

The EAZY will give you hours of fun and satisfaction in the air. We wish you lots of good flights.
Treat your glider well and have respect for the demands and dangers of flying.
We ask all pilots to fly with care and to respect the national and international laws with regard
to our sport.
SEE YOU IN THE SKY!
45