Airdesign eazy superlight Betriebshandbuch Seite 32

3-Hangpoint Risers
The risers of the EAZY have three main riser connection, A, B, and C. Only the outer A-line is
attached separately for big ears.
The risers are designed with many of the features developed for our performance gliders but
retain a simplicity that helps you during the first steps into our sport.
RazorEdge
•
The precise trailing edge sail cutting results in a very clean surface which improves
the glide substantially.
3D-Cut und Nose-Wire
•
A 3D-sailcut incorporated in the important 'nose' area of the glider profile and nylon-
rods instead of mylar combine to provide an extremely clean leading edge and
improve the flight behaviour and performance.
•
The advantage of the nylon-rods as opposed to mylar
rods absorb much of the punishment suffered by the leading edge during the early
stages of learning and can be replaced if needs be. This ensures that the flight and
takeoff behaviour stay the same over a long period of time.
Brake Gathering & Brake Shifting
To improve braking efficiency we have
incorporated a brake-gathering system in
the outer brakes. This makes the glider
more agile whilst at the same time keeping
the travel long and forgiving.
The long brake pulley webbing makes it
easy to influence the turn behaviour. If you
slide your inside hand towards yourself,
the EAZY turns tighter and with more bank.
If you push the brake away from you, the
is a cleaner profile. The flexible
31