Airdesign eazy superlight Betriebshandbuch Seite 31

DESIGN DETAILS
RISERS:
EAZY Launch Technique with the A-Riser
To take-off grab the A-risers between the 'EAZY LAUNCH' marks, this is a little but lower than
may be considered 'normal' to some pilots. This position prevents the canopy from collapsing if
you pull too hard on the A-risers and makes take-off simple every time, especially for students
or beginners.
Comparision: „EAZY Launch" technique ...
and Standard
Big Ears
The A-lines for big ears are attached to separate risers. The
marking 'EAR' make them easy to find.
B-Stall
The B-risers are marked with a bold `B´, to make sure the
right ones are used.
Riser- Antitwist-Connection
This is a webbing link which connects the B and C risers.
This webbing prevents the risers from twisting and
simplifies sorting out the risers and lines.
30