Cleaning And Care; What To Do - Bamix Basic M120 Anleitung

22

Cleaning and care

The bamix is very easy to clean. Remove the attachment and wash
®
it separately. To clean the attachment, rinse the dirty parts under
running water (do not switch on the appliance).
The easiest way to clean off bits of food which have stuck to the
bamix is to hold it in a jug with hot water and switch it on.
®
Take care that the switch of the bamix
with the water.
The appliance and the cutter guard are not suitable
for cleaning in the dishwasher.
Important: Clean the appliance as soon as you have finished
working, to prevent the drive shaft or the attachment getting
clogged. If not in use, always remove the attachments from
the appliance.
To keep the bamix
few months with vegetable oil.
Hold the bamix with the cutter guard facing up, lubricate the drive
®
shaft with 2-3 drops of oil and then run the appliance for approx.
30 seconds. Then clean the shaft with hot water.

What to do...

If the drive shaft of the appliance fails to rotate?
If the bamix is not used for a prolonged period of time, the drive
®
shaft might become stuck, or the attachment might slip from the
shaft stub, as the parts are clogged up by minute food residue.
Place the attachment for 5-10 minutes in a jug of hot water.
Then switch on the appliance. Normally, all parts should now work
perfectly again. If not, try to free the shaft carefully with pliers.
Assembling SwissLine stand
1. Insert front panel into the base
2. Slide cable holder into place
3. Mount flap for the storage of the attachments
running smoothly for longer, lubricate it every
®
does not come into contact
®