Specifications - Synq DMC.200 Bedienungsanleitung

ENGLISH
 You press the YES button: Press yes (pitch bend + button) to load the pre-stored cue points
and loops. The display shows RECALL while the Hot cue buttons are filled up.
 You press the NO button: the cue points are not loaded and the display becomes normal.
You can start playback right away.
 You do nothing: after some seconds the display becomes automatically normal and of
course the cue points are not loaded.
Note: in the setup menu (point4) you can choose to load the cue points automatically (autoload). In
that case the player asks nothing but simply loads the cue points.

SPECIFICATIONS

Power Supply:
Power Consumption:
Reference input level / impedance:
Line:
Phono:
Mic:
Maxi input: (1kHz, THD=1%, EQ flat, max. gain, load=100kΩ)
Line:
Phono:
Mic:
Talkover:
Frequency response: (EQ flat, max. gain, load = 100kΩ)
Line:
Phono:
Mic:
THD+N: (EQ flat, max. gain, w/20kHz LPF, A-weighted, load = 100kΩ)
Line:
Phono:
Mic:
Output level / impedance:
Master unbalanced:
Master balanced (load=600Ω):
Booth master:
Headphones (load=32Ω):
Max. output: (1kHz, THD=1%, EQ flat, max. gain, load = 100kΩ)
Master:
Headphones:
USB FORMAT:
File System:
Max. Hard disk capacity:
Max. Folders:
Max. Tracks / Folder:
Max. Q-DBASE track capacity:
WAV FORMAT:
MP3 FORMATS:
MPEG1 Layer3 (ISO/IEC11172-3):
Bitrates:
Bitrate modes:
MPEG2 Layer3 (ISO/IEC13818-3):
Bitrates:
Bitrate modes:
MPEG2,5 Layer3:
Bitrates:
Bitrate modes:
Q-DBASE Software :
File extensions :
System requirements :
SYNQ
®
AC 100 - 240V, 50/60Hz
21W
47kΩ /-14dBV (200mV) +/-0.1dB
47kΩ /-51dBV (2.8mV) +/-0.1dB
10kΩ /-56dBV (1.5mV) +/-0.1dB
> +0dBV
> -38dBV
> -42dBV
-20dB +/-2dB
20Hz - 20kHz +/-2dB
20Hz - 20kHz +2/-3dB (RIAA)
20Hz - 20kHz +2/-3dB
< 0.06% @ 1 KHz
< 0.08% @ 1 KHz
< 0.15% @ 1 KHz
1kΩ /3.8dBV (1.55V) +/-2dB
600Ω /+6dBm (1.55V) +/-3dB
1kΩ /3.8dBV (1.55V) +/-2dB
33Ω /0dBV (1V) +/-2dB
> +18dBV (8V) load=100kΩ
> +4dBV (1,6V) load=32Ω
FAT12/16/32
500GB
999
999
9999
PCM, 1411kbps.
mono / stereo sampled at: 32 - 44,1 - 48kHz
32 – 320 Kbps
CBR (Constant Bitrate) or VBR (Variable Bitrate)
mono / stereo sampled at: 16 – 22,05 - 24kHz
32 – 160 Kbps
CBR (Constant Bitrate) or VBR (Variable Bitrate)
mono / stereo sampled at: 8 – 11,025 - 12kHz
32 – 160 Kbps
CBR (Constant Bitrate) or VBR (Variable Bitrate)
.DBH + .dat + .DBX
RAM 512MB
100MB free disk space
®
Microsoft Win XP SP3 ~ Win Vista SP2 ~ Win 7
23/107
OPERATION MANUAL
DMC2000