Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

ENGLISH
57. DJ MIC INPUT JACK: Accepts either an unbalanced microphone with 1/4" mono jack. This input is
mainly used as DJ-microphone. The talkover does not affect the signal level of this input.
58. MIC1 VOL: Used to adjust the input level of micro 1.
59. MIC2 VOL: Used to adjust the input level of micro 2.
60. MIC TONE: used to adapt the sound of both microphone inputs.
61. MIC ON/OFF/TALK OVER SWITCH: Used to switch the microphones:
 OFF: Both mic1 & mic2 are switched off.
 ON: Both mic1 & mic2 are switched on.
 TALK OVER: mic1 & 2 are switched on; the sound level of all the other channels will decrease to
around -20dB.
62. CUE MIX: With this knob you can mix the the input channels through the headphone output (64):
 Put the knob in the extreme left position to hear channel1.
 Put the knob in the extreme right position to hear channel2.
 Put the knob in any other position to hear a mix of the two signals.
This option makes it possible to check your mix before you put it on the master output.
63. HEADPHONE VOLUME: controls the sound level of the headphone output.
64. HEADPHONE output: if you like you can connect your headphone here.

VFD DISPLAY

A. PLAY: appears while the unit is playing a track.
B. PAUSE: appears while the player is in pause or cue mode.
C. CUE: appears when the player is waiting at the CUE-point.
D. TOUCH INDICATOR: appears when the touch sensitive part of the jog wheel is active.
E. ALPHANUMERIC DISPLAY: Shows all kinds of important information like effect parameters, loop
information, ID3-tags, ...
F. BPM DISPLAY: the automatic beat counter shows the number of Beats Per Minute on the display. In
manual mode the display shows "BPM". In automatic mode the display shows "AUTOBPM". (press the
TAP button for 2seconds to switch to automatic mode)
G. MEMORY BUCKET: shows the status of the buffer memory needed for anti-shock and some special
functions. Each bar of the bucket represents 2seconds buffer memory.
SYNQ
®
9/107
OPERATION MANUAL
DMC2000

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis