Swarovski Optik Z6/Z6i Bedienungsanleitung Seite 12

2.6 OPERATION OF THE RETICLE ILLUMINATION
1. OFF/DAY/NIGHT switch
First of all choose between daytime (symbol)
and twilight (symbol) illumination by turning the
switch to the appropriate position.
2. Brightness control
ments by pressing the buttons once (individual
pulse).
3. Switching off
4. Memory function
When turning off the illumination unit, the last
brightness setting used for DAY or NIGHT will be
stored and automatically activated when the unit
is turned on again.
22
Z6/Z6i / EN Z6/Z6i / DE
You can now adjust the
brightness in the mode
selected by means of the
+/– button. To quickly find
the optimum brightness,
the button can remain
pressed (sustained pulse).
You can make fine adjust-
To do this, turn the OFF/
DAY/NIGHT switch to the
center position.
5. Automatic turn-off function
The illumination of the unit automatically turns
off if no brightness adjustment has been carried
out within a period of 3 hours during the day or
5 hours at night.
6. SWAROLIGHT
The illuminated Z6i models are equipped with an
intelligent tilt sensor. This senses whether or not
the rifle scope is in a shooting position and trans-
mits this information to the illumination unit. The
rifle scope switches off if the tilt angle exceeds
70° (upwards or downwards), if you position the
weapon on the turret at a right angle, for example.
The rifle scope also switches off if the lateral tilt
exceeds 30° (if you rest the weapon on your legs,
for example).
When the weapon is returned to the shooting posi-
tion, the illumination automatically switches on.
Z6/Z6i / EN Z6/Z6i / DE
23