Tool Specifications - Würth EWS 125-S Bedienungsanleitung

EWS 115..125 ES - Buch Seite 15 Donnerstag, 20. Juli 2006 11:44 11
Angle Grinder
Article number
Rated power input
Output power
No-load speed
Grinding disc dia., max.
Grinder spindle thread
Kickback Stop
Restarting Protection
Reduced starting current
Constant Electronic Control
Speed Preselection
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltages and models for specific countries, these values
can vary. Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
Machine Elements
1 Release lever
2 Spindle lock button
3 On/Off switch
4 Thumbwheel for speed preselection
(EWS 125-ES)
5 Auxiliary handle
6 Grinder spindle
7 Protection guard
8 Mounting flange with O-ring
9 Grinding/cutting disc*
10 Clamping nut**
11 Two-pin spanner for clamping nut
12 Quick-clamping nut **
13 Hand guard*
14 Rubber sanding plate *
15 Sanding sheet*
16 Round nut*
17 Cup brush*
* Optional accessories
** depends on design
Not all of the accessories illustrated or described are included
as standard delivery.

Tool Specifications

EWS 115
0702 471 X..
800
[W]
500
[W]
11 000
[rpm]
115
[mm]
M 14
–
–
–
–
–
[kg] 1.9
/ II
The machine is intended for cutting, roughing and
brushing metal and stone materials without using
water. For cutting stone, a cutting guide is required.
The machine is not intended for working with dia-
mond cutting heads.
For machines with electronic control: With
approved sanding tools, the machine can also be
used for sanding.
For damage caused by usage other then intended,
the user is responsible.
Information on Structures
Slots in structural walls are subject to the Standard
DIN 1053, Part 1 or country-specific regulations.
These regulations are to be observed under all cir-
cumstances. Before beginning work, consult the
responsible structural engineer, architect or the con-
struction supervisor.
EWS 125-S EWS 125-ES
0702 472 X.. 0702 473 X..
1 100 1 100
660 660
11 000 2 800 – 11 000
125 125
M 14 M 14
–
2.0 2.0
/ II / II
Intended Use
15