Herunterladen Inhalt Inhalt Diese Seite drucken

Description Of The Device; Features; Installation; Attachment - EuroLite LED T-36 RGB Spot Bedienungsanleitung

10 mm
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

DESCRIPTION OF THE DEVICE

Features

Powerful T-36 RGB spot as LED DMX model
• DMX-512 control via regular DMX-controller (occupies 5 channels)
• Equipped with 55 x 10 mm LEDs: 18 x red, 18 x blue, 19 x green
• Sound-control via built-in microphone
• Color-change speed and strobe effect adjustable via dip switches
• Locking possibility at the mounting bracket
• For illuminating e. g. mirror balls, entrance or counter areas or as basic illumination
• Perfect in public places, main halls, stages, lounges
• Multi-color color-changes
• Master/Slave function
• Advantages of LED-technology: extremely long life of the LEDs, low power consumption, minimal heat
emission, defacto maintenance free with brilliant light radiation
• Available in alu or in black

INSTALLATION

Attachment

Before attaching the device, make sure that the installation area can hold a minimum point load of 10 times
the device's weight.
The device must only be installed absolutely planar at a vibration-free, oscillation-free location.
The device must be installed out of the reach of people.
The device must always be installed via all fixation holes. Do only use appropriate screws and make sure
that the screws are properly connected with the ground.
The durability of the installation depends very much on the material used at the installation area (building
material) such as wood, concrete, gas concrete, brick etc. This is why the fixing material must be chosen to
suit the wall material. Always ask a specialist for the correct plug/screw combination indicating the maximum
load and the building material.
Procedure:
Step 1: The holes for the installation are on the mounting bracket/plate.
Step 2: Hold the mounting bracket/plate onto the location where the device is to be installed.
Step 3: Mark the boreholes with a pen or a suitable tool.
Step 4: Drill the holes.
Step 5: Hold the mounting bracket/plate in the desired position and fix it.
Before taking into operation for the first time, the installation has to be approved by an expert!
Permanent installation is recommended!
DANGER TO LIFE!
16/40
00024228.DOC, Version 1.2

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis