Maintenance and cleaning of the grinding and remediation milling cutter
WARNING: To reduce the risk of injury from unexpected starting
or electrical shock, unplug the power cord before working on the
machine.
Keep the machine clean. Regularly free it from milling and grin-
Caution!
ding dust and clean through the ventilation opening using with
compressed air. Remove accumulated dust from working parts.
Make sure that the machine operates properly. Periodically check screws and
bolts for tightness.
Machine storage
IMPORTANT: In case the grinding and remediation milling cutter should not be
used, it must NOT be put down on its extractor hood or in erect position on the
motor cover (s. illustration)
Wiring diagram
L2
L1
AC
230 V
BROWN
BLUE
54
MOTOR
SWITCH
CARBON
BRUSH
CARBON
BRUSH