General Information; Safety Instructions; Description Of The Appliance - Kärcher T 400 T-Racer Betriebsanleitung

General information

Environmental protection
The packaging material can be recy-
cled. Please do not place the packag-
ing into the ordinary refuse for dispos-
al, but arrange for the proper recy-
cling.
Old appliances contain valuable ma-
terials that can be recycled. Please
arrange for the proper recycling of old
appliances. Please dispose your old
appliances using appropriate collec-
tion systems.
Notes about the ingredients (REACH)
You will find current information about the
ingredients at:
www.kaercher.com/REACH
Spare parts
Use only original KÄRCHER spare parts.
You will find a list of spare parts at the end
of these operating instructions.
You can use the extension pipes with any
other Kärcher accessory.

Safety instructions

Please read and comply with
these original instructions prior
to the initial operation of your appliance and
store them for later use or subsequent own-
ers.
 Observe the safety information for your
high-pressure cleaner.
 Only trigger the high-pressure jet at the
high-pressure gun if the T-Racer is lo-
cated on the surface to be cleaned.
 Further people must not be in the imme-
diate vicinity of the cleaning head
 Beware of the recoil! Make sure that
you have a firm footing and hold the
high-pressure gun with the extension
tube or handle firmly.
 Upon completion of the cleaning opera-
tion, switch off the high-pressure clean-
er. When working on the T-Racer, dis-
Tip
connect it from the high-pressure gun
as well.
 Maximum water temperature 60°C
(please observe the instructions for
your high-pressure cleaner).

Description of the Appliance

When unpacking the product, make sure
that no accessories are missing and that
none of the package contents have been
damaged. If you detect any transport dam-
ages please contact your dealer.
See page 2, illustration
1 Casing
2 Handle
3 Turning handle "power" (to adjust the
height of the nozzles)
4 Foot pedal for edge cleaning
5 Foot pedal for surface cleaning
6 Bayonet connection with safety cover
7 Extension tubes (two tubes)
8 Rotor arm
9 Green high-pressure nozzle
10 High pressure nozzle
11 Safety clip
12 Protective grid
Symbols on the machine
Danger!
Do not reach under the edge of
the T-Racer during operation!
The T-Racer is ideally suited for the clean-
ing of floor and wall surfaces made of differ-
ent materials, such as wood, plastic, con-
crete, tiles, and natural stone. Use the T-
Racer exclusively in your private house-
hold.
– 1
EN
Proper use
7