Jacobsen HR-5111 Wartung Und Service Seite 135

Item Part No.
556889
1
2 556888
3 556871
4 592548
5 556859
6 556873
7 556883
8 556852
9 556854
10 556874
11 556896
12 593000
13 556853
14 556864
15 556865
16 556866
17 556867
18 553407
19 592302
20 592405
21 592406
22 592407
23 593047
24 553516
25 562665
26 556899
27 556895
Qty. Description
1 Housing, Left Side Differential
1 Housing, Right Side Differential
1 Bevel Gear and Pinion
1 Differential
2 Tapered Bearing, Cup and Cone
1 Spacer
1 Housing, Input Shaft Bearing
1 O-RIng
1 Seal, Inner Input Shaft
1 Seal, Outer Input Shaft
1 Nut, M25-1.5 Elastic Stop
12 Screw, M10 x 30 mm Hex Head
1 O-Ring
AR Shim
AR Shim
AR Shim
AR Shim
8 Screw, M10 x 25 mm Hex Head
2 Bearing, Ball
AR Shim
AR Shim
AR Shim
1 Plug, M18-1.5 Drain
1 Seal
2 Dowel, Sleeve
2 Plug
1 Breather
HR-5111
Serial Numbers/Notes
Matched Set
Shim as required to set Bevel
Pinion and Ring Gear Clearance.
See HR-5111 Service Manual
Shim as required to set Pinion and
Ring Gear Backlash Adjustment.
See HR-5111 Service Manual
> Change from previous revision
131