Herunterladen Inhalt Inhalt Diese Seite drucken

Preparing Sandwiches - Silvercrest SSWM 1400 A1 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für SSWM 1400 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 56
6. Preparing
sandwiches
NOTES:
• We recommend a toasting loaf for mak-
ing sandwiches.
• Prepare the sandwiches before switch-
ing on the appliance.
• As far as possible, spread the filling so
that the sandwiches are of an even
thickness.
1. Select a location for the appliance
which is firm, level and non-flammable.
Maintain a distance of approx. 50 cm
from other objects.
2. Unwind the mains cable completely.
3. Open lock 5.
4. Lift open lid 1, taking hold of the appli-
ance by lid handle 4.
5. Wipe off any dust with a dry cloth.
6. Close lid 1.
7. Close lock 5.
8. Insert the power supply plug into a suit-
able mains socket. Red indicator light 2
now comes on and the appliance heats
up.
As soon as operating temperature has
been reached, green indicator light 3
comes on. The appliance is now ready
to use.
9. Open lock 5.
10. Lift open lid 1, taking hold of the appli-
ance by lid handle 4.
11. Place the prepared sandwiches in the
moulds 6.
12. Close lid 1.
13. Close lock 5.
NOTES:
• Depending on the thickness of the sand-
wich and the desired degree of brown-
ing, the toasting process takes a number
of minutes (approx. 4 - 8 minutes).
• During toasting, green indicator light 3
will go off and come back on. This con-
trols the required operating tempera-
ture.
DANGER! Risk of injury
through burning!
When you open lid 6, hot steam may
rise towards you. You should therefore
protect your hands with a tea towel or
oven gloves.
14. Proceed as described below to check
whether the sandwiches are ready.
- Open lock 5.
- Lift open lid 1, taking hold of the ap-
pliance by lid handle 4.
15. Proceed as described below if the
sandwiches are not ready:
... Close lid 1.
... Close lock 5.
16. As soon as the sandwiches have been
toasted to your taste, remove them from
the appliance.
WARNING! Risk of material damage!
Only use implements made of wood or
heat-resistant plastic. Metal implements
might damage the coated surfaces.
17. Remove the power supply plug from the
mains socket after use. This is the only
way to ensure that the appliance is
completely de-energized.
7
GB

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Diese Anleitung auch für:

281967

Inhaltsverzeichnis