Remote Control - Yamaha R-S201 Bedienungsanleitung

CONTROLS AND FUNCTIONS

Remote control

■ Common controls
The following parts and controls can be used no matter
which input source is selected.
1 Infrared signal transmitter
Sends infrared signals.
A
2
(power)
Turns this unit on, or sets it to standby mode.
3 SLEEP
Sets the sleep timer (see page 13).
6
En
4 Input selector buttons
Select the input source you want to listen to.
y
• The input source names correspond to the names of the
connection jacks on the rear panel.
• To select TUNER as the input source using the remote
control, press FM or AM.
5 TREBLE –/+
Increases or decreases the high frequency response.
Control range: –10 dB to +10 dB
6 BASS –/+
Increases or decreases the low frequency response.
Control range: –10 dB to +10 dB
7 BALANCE L/R
Adjusts the sound output balance of the left and right
speakers to compensate for sound imbalances.
Control range:
(+20 dB)
The opposite side of
channel is muted.
8 B / C / D / E / ENTER
Selects and confirms items in the Option menu (see
page 19).
9 MENU
Turns the Option menu on and off (see page 19).
0 VOLUME +/–
Increases or decreases the sound output level.
A SPEAKERS A/B
Turns on or off the speaker set connected to the
SPEAKERS A and/or SPEAKERS B terminals on the
rear panel each time the corresponding button is
pressed (see page 12).
B DIMMER
Select the brightness level of the front panel display
from 3 levels by pressing this button repeatedly.
y
• This setting is retained even if you turn off this unit.
• The default setting is the brightest.
C MUTE
Mutes the sound output. Press again to restore the
sound output to the previous volume level.
(center) (+20 dB)
The opposite side of
channel is muted.